Three independent reviews (hijack resistance, reliability, code health)
of the whole tree. This is what they found that could let a bad route in
or take the daemon down.
Hijacks:
- A route had two paths on a two-octet session, AS_PATH and AS4_PATH,
read in two places by two rules. A peer could make the origin checked
on import differ from the one checked at revalidation, and get an
RPKI-invalid route into the table. AS4_PATH is now merged into AS_PATH
once, on receipt (RFC 6793 §4.2.3), and nothing else knows of it.
- The next hop is judged on import: it must be usable, agreed on
(RFC 8950), and by default the peer itself.
- Our own originated prefixes are not taken from other networks.
- A route for a network the machine is on is never put in the kernel.
- Paths with an AS_SET are refused (RFC 9774).
- A configured peer gets one session, not one per BGP Identifier.
- More IPv6 special-purpose prefixes are bogons.
Reliability:
- A batch of requests the kernel refused could overflow the netlink
socket and end the daemon. The socket has room now, a lost answer or a
silent kernel means asking what is there, and neither is fatal.
- Working the routes out again within the grace period after a restart
no longer drops the routes being kept.
- That work can no longer be put off for ever by interface changes.
- Peers whose sessions keep failing are slowed down.
- Unused attribute sets are swept when they pile up, not only each
minute.
- Log lines a peer can cause are said once in a while.
- An RTR answer is bounded in size and time; data cannot expire between
two refreshes.
- The shard of a key is taken from a stirred hash: neighbouring bits of
the hash proved alike for prefixes in a row. The test that showed it,
failing one run in sixteen, is deterministic now.
The lab has a phase, hijacks, in which FRR tries the first three.
route::apply is a struct with methods instead of nested closures, and
the kernel task's loop is shorter.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
For a link that has only IPv6 addresses.
- The Extended Next Hop capability is offered on every session over IPv6
whose families include IPv4 unicast, and used if the peer offers it too.
Nothing to configure.
- On such a session our IPv4 routes go out in MP_REACH_NLRI with the
session's IPv6 address as next hop, and are withdrawn in
MP_UNREACH_NLRI. Without the agreement they are not sent, as before.
- IPv4 routes are read with an IPv6 next hop, global or global with
link-local.
- The kernel installer resolves an IPv4 route's IPv6 next hop like any
other and installs it: by way of an IPv6 nexthop object, or with RTA_VIA
where routes carry their own gateway.
Tested against a real kernel in both modes, with a link-local next hop
too, and in the lab against FRR and BIRD: the new `v6only` phase takes
the IPv4 addresses off the exchange LAN, runs one IPv6 session with each
router for both families, and pings IPv4 across.
Sessions between link-local addresses are not supported yet.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
scripts/interop/lab.sh runs the daemon against FRR, BIRD and Routinator,
each in a network namespace on one exchange LAN, and checks what every
side ends up with: sessions and routes over IPv4 and IPv6 with their
attributes, four-octet AS numbers, ADD-PATH, RFC 9234 roles and Only to
Customer, RTR version 2 and invalid routes, route refresh, session resets,
killed peers, a cut wire, the daemon stopped and killed, a table of a
million routes and a restart under it, role mismatch and the prefix limit.
All of it passes against FRR 10.5.1, BIRD 2.18 and Routinator 0.15.2.
scripts/interop/real-rpki.sh checks the RTR client against a Routinator
with the real RPKI: 713,258 IPv4 and 187,479 IPv6 VRPs and 3,379 ASPAs,
the same numbers on both sides.
What the lab found, fixed here:
- A daemon restarted with its routes in the kernel removed them all at
once, its table being empty until the peers had sent theirs again, and
then put them back: no forwarding meanwhile. Routes of an earlier run
are now kept for `stale_seconds` (120 by default) and only those nobody
announced again are removed. A restart under a million routes takes
1.1 s to be in step, with nothing removed.
- FRR ends a session it loses to a collision with a state machine error
without a subcode, which was shown as "error code 5 subcode 0".
CI gets a job that runs the lab.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A million IPv4 routes took 1.6 s to install (release build); they take
1.1 s now, and 0.5 s to remove instead of 1.15 s. Most of what is left is
the kernel's own work on each route.
- Nexthop objects (Linux 5.3 and later): a gateway is put in the kernel
once and routes name it, so the kernel checks it once and not for every
route. The daemon makes its own objects, uses nobody else's, is told
when one of its own is removed and puts it back, and removes them when
it stops, which takes all the routes that name them along at once.
`without_nexthop_objects` turns this off; a kernel without them is
noticed and served as before.
- Writing to the kernel is a task of its own, fed through a short queue,
so the next batch is worked out while the kernel is busy with the last.
"In step" is said when the kernel has done the batch that completes the
table, not when it was handed over.
- What a next hop resolves to is kept, by next hop: it was looked up among
the machine's addresses for every route.
- A quicker hash for the plan's maps, and no lookups in the ones that are
empty.
Fixes a hole found on the way: when an interface went down and came back
within the second it takes us to react, the kernel had dropped our routes
and we did not put them back, since nothing about them had changed for
us. After such a change the kernel is now asked what it actually has.
scripts/in-namespace.sh runs one command in a scratch namespace;
FERRIX_ROUTES sets the size of the timing test.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A peer's configured role now does three more things:
- Our OPEN carries the BGP Role capability with what we are to the peer.
A peer whose own says it is something that does not pair with that, or
that sends two different roles, is refused with OPEN Message Error /
Role Mismatch. A peer that says nothing is accepted unless require_role
is set. A role on a peer in our own AS is a configuration error.
- Routes from a provider, a peer or a route server are marked Only to
Customer on the way in if they are not already, and our routes are
marked on the way out to a customer, a peer or a route server client.
- A marked route from a customer or route server client, or from a peer
with someone else's mark, is a leak and is refused. No policy setting
turns that off.
The packet crate gains the Only to Customer attribute (malformed:
treat-as-withdraw), and the Role Mismatch subcode is corrected from 8 to
11.
The status page shows whether the peer confirmed its role.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The work of the speaker-cleanup branch as one commit; the branch keeps
the step-by-step history.
Sessions
- The state machine is a pure function from events to actions, driven by
one task per connection. Idle, Connect and Active belong to a dialer
that keeps configured peers up with backoff.
- Capabilities are negotiated: address families, four-octet AS numbers
with AS_TRANS and AS4_PATH, route refresh, ADD-PATH per family and
direction.
- Collision detection per RFC 4271 section 6.8, by address and
identifier.
- Connections are taken only from configured peers, a few per address.
- A panic in a session is contained and answered with a Cease; a core
task that stops shuts the server down with a Cease to every peer.
- Writes that make no progress are given up (RFC 9687).
Codec
- Malformed UPDATEs are handled as RFC 7606 says: treat-as-withdraw,
attribute discard, or session reset, with the NOTIFICATION to send.
- Address families are open types; any can be named and ignored.
- Prefixes are fixed-size values, normalised, with path identifiers.
- Lengths are filled in after writing; one definition of each type code.
- Property tests and fuzz targets for every decoder.
Routing table
- Adj-RIBs-In and Loc-RIB in one sharded table that sessions write to
directly. Routes are sixteen bytes; attribute sets are interned in
wire form. Best-path selection per RFC 4271 section 9.1.2.2 with
deterministic MED.
- A journal per shard lets followers read changes at their own pace;
one that falls behind is resynchronised.
- On a RIPE RIS dump of 148 peers and 39.3M routes: loaded in 2.0 s on
12 cores, about 52 bytes a route.
Announcing
- Originated routes come from the configuration. Each session has its
own exporter with an Adj-RIB-Out, so a slow peer delays only itself.
- Routes to a peer in our own AS have an empty path and a LOCAL_PREF.
Operations
- HTTP status page, JSON API, event stream and Prometheus metrics.
- Benchmarks on synthetic and real tables.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- Implement passive-side BGP FSM (OpenSent → OpenConfirm → Established)
with hold timer, keepalive timer, and NOTIFICATION on expiry
- Add bgp-server crate: config validation, TCP listener accept loop
(BgpServerBuilder → BgpServer), connection dispatch
- Add bgp-rib crate: Adj-RIB-In actor owning route state with event
broadcast for streaming consumers and snapshot for introspection
- Wire Adj-RIB-In into FSM: announce/withdraw on UPDATE for both legacy
IPv4 NLRI fields and MP_REACH/MP_UNREACH path attributes
- Add bgp-integration-tests crate with 15 end-to-end tests covering
session establishment, timers, UPDATE handling, and RIB introspection
- Fix require_empty! macro bug in open.rs (checked wrong buffer)
- Fix FourByteAsn capability parser returning consumed buffer as remainder
- Fix tracing subscriber not being installed in TracingArgs::install
- Expand docs/RFCs.md with full implementation status across 15 RFCs
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
