Rayhaan JaufeerallyandClaude Fable 5.1
f9ef781d51
A peer's configured role now does three more things: - Our OPEN carries the BGP Role capability with what we are to the peer. A peer whose own says it is something that does not pair with that, or that sends two different roles, is refused with OPEN Message Error / Role Mismatch. A peer that says nothing is accepted unless require_role is set. A role on a peer in our own AS is a configuration error. - Routes from a provider, a peer or a route server are marked Only to Customer on the way in if they are not already, and our routes are marked on the way out to a customer, a peer or a route server client. - A marked route from a customer or route server client, or from a peer with someone else's mark, is a leak and is refused. No policy setting turns that off. The packet crate gains the Only to Customer attribute (malformed: treat-as-withdraw), and the Role Mismatch subcode is corrected from 8 to 11. The status page shows whether the peer confirmed its role. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
72 lines
3.0 KiB
Protocol Buffer Text Format
72 lines
3.0 KiB
Protocol Buffer Text Format
# A worked example; the fields are documented in
|
|
# crates/server/proto/config.proto.
|
|
router_id: "10.0.0.1"
|
|
local_asn: 65000
|
|
|
|
# Where to accept BGP connections. Port 179 needs privileges; pick another
|
|
# port to run unprivileged against a peer that dials a custom port.
|
|
listen_endpoints { address: "127.0.0.1" port: 179 }
|
|
listen_endpoints { address: "::1" port: 179 }
|
|
|
|
# A peer we connect to and accept connections from. Connections from any
|
|
# other address are closed unread, unless accept_unconfigured_peers is set,
|
|
# which is for a closed test network only.
|
|
peers {
|
|
name: "r1"
|
|
endpoint { address: "127.0.0.1" port: 1791 }
|
|
remote_asn: 65001
|
|
hold_time_seconds: 30
|
|
# Offer only these families to the peer. Left out, all are offered.
|
|
address_families: IPV4_UNICAST
|
|
address_families: IPV6_UNICAST
|
|
# Take several routes for a prefix from this peer, if it offers to send
|
|
# them (ADD-PATH). Also ADD_PATH_SEND and ADD_PATH_BOTH. Off by default.
|
|
add_path: ADD_PATH_RECEIVE
|
|
# What the peer is to us: PROVIDER, CUSTOMER, PEER, ROUTE_SERVER or
|
|
# ROUTE_SERVER_CLIENT. With it the peer must not claim to be something
|
|
# else (RFC 9234), routes are marked "only to customer" and leaks of
|
|
# marked routes are refused; and with a validator that has ASPAs, the
|
|
# AS paths of the peer's routes are verified.
|
|
# role: PEER
|
|
# Refuse the peer if its OPEN does not say what it is.
|
|
# require_role: true
|
|
# Which of the peer's routes are taken. Without this block the general
|
|
# checks still apply: no private or reserved prefixes or AS numbers,
|
|
# nothing longer than /24 or /48, no default route, and a path that
|
|
# begins with the peer's AS. This example is a test network that uses
|
|
# exactly such prefixes and AS numbers, so it takes them.
|
|
import {
|
|
# More routes than this ends the session and keeps the peer down
|
|
# for hold_down_seconds (600 unless set).
|
|
max_prefixes: 1000
|
|
accept_bogons: true
|
|
# For a real peer: the prefixes and origin ASes it may announce,
|
|
# as generated from the routing registries.
|
|
# prefixes { prefix: "193.0.0.0/21" max_length: 24 }
|
|
# origin_asns: 3333
|
|
}
|
|
}
|
|
connect_retry_seconds: 5
|
|
|
|
# Let a restarted peer replace a stale Established session immediately
|
|
# (RFC 4271 CollisionDetectEstablishedState). Default false.
|
|
collision_detect_established_state: false
|
|
|
|
# Routes this router originates, announced to every peer.
|
|
originate { prefix: "10.100.0.0/16" }
|
|
originate {
|
|
prefix: "2001:db8:100::/48"
|
|
med: 50
|
|
communities: "65000:100"
|
|
large_communities: "65000:1:2"
|
|
}
|
|
|
|
# Validation with the RPKI: refuse routes whose origin AS is not the one the
|
|
# holder of the addresses authorised, and, from peers with a role, routes
|
|
# whose AS path is a leak. Point it at a validator's RTR server.
|
|
# rpki { caches { address: "127.0.0.1" port: 3323 } }
|
|
|
|
# Read-only status page, JSON API and metrics. It has no authentication:
|
|
# keep it on loopback or behind a reverse proxy.
|
|
http_endpoint { address: "127.0.0.1" port: 8080 }
|