Phase 4 of the teaching demo: the daemon now brings up its own sessions. - New dialer task per configured peer: connect with a timeout, run the same FSM as the passive side, back off exponentially (from connect_retry_seconds, capped at two minutes) and retry forever. Stays idle while a session with the same remote IP and ASN already exists. - The peer's OPEN must carry the configured ASN, otherwise the session is refused with a Bad Peer AS notification. Inbound connections from a configured peer's address get the same check plus the configured name and hold time. - SessionRegistry tracks configured peers and their dial state (Idle / Connecting / Backoff with last error and retry time). - /api/peers merges configured peers with live sessions so the page shows peers that are down, why, and when the next attempt is; unconfigured inbound sessions are listed after them. - fake_peer gains --listen so it can stand in for a router the daemon dials. - Integration tests: dial and establish, reconnect after the peer closes, wrong ASN refused, inbound from a configured address checked and named. Not implemented: RFC 4271 §6.8 collision detection; a real router on the other end resolves the rare race by closing one connection. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
178 lines
6.6 KiB
Rust
178 lines
6.6 KiB
Rust
//! The active side: the server dials its configured peers and keeps
|
|
//! retrying.
|
|
|
|
use std::net::{Ipv4Addr, SocketAddr};
|
|
use std::time::Duration;
|
|
|
|
use bgp_integration_tests::test_peer::TestPeer;
|
|
use bgp_integration_tests::test_server::TestServer;
|
|
use bgp_packet::errors::{BgpError, OpenMsgSubcode};
|
|
use bgp_packet::message::Message;
|
|
use bgp_primitives::ip_prefix::IpPrefix;
|
|
use bgp_rib::{LocalRoute, LocalRouteAttrs};
|
|
use bgp_server::config::PeerConfig;
|
|
use bgp_server::session::DialState;
|
|
use eyre::Result;
|
|
use tokio::net::TcpListener;
|
|
|
|
const LOCAL_ASN: u32 = 65000;
|
|
const PEER_ASN: u32 = 65001;
|
|
const TIMEOUT: Duration = Duration::from_secs(5);
|
|
|
|
/// Starts a server configured to dial `listener`'s address as peer "lab".
|
|
async fn server_dialing(listener: &TcpListener, remote_asn: u32) -> Result<TestServer> {
|
|
let endpoint: SocketAddr = listener.local_addr()?;
|
|
TestServer::start_with(LOCAL_ASN, |c| {
|
|
c.connect_retry = Duration::from_millis(200);
|
|
c.peers = vec![PeerConfig { name: "lab".into(), endpoint, remote_asn, hold_time_secs: 90 }];
|
|
})
|
|
.await
|
|
}
|
|
|
|
async fn accept(listener: &TcpListener) -> Result<TestPeer> {
|
|
let (stream, _) = tokio::time::timeout(TIMEOUT, listener.accept()).await??;
|
|
Ok(TestPeer::from_stream(stream))
|
|
}
|
|
|
|
#[tokio::test]
|
|
async fn test_server_dials_configured_peer_and_establishes() -> Result<()> {
|
|
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
|
|
let server = server_dialing(&listener, PEER_ASN).await?;
|
|
|
|
let mut peer = accept(&listener).await?;
|
|
// Both sides send OPEN on connect; the test peer's handshake order works
|
|
// whichever side opened TCP.
|
|
let open = peer.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90).await?;
|
|
assert_eq!(open.asn, LOCAL_ASN as u16);
|
|
|
|
let mut events = server.registry.subscribe();
|
|
// Either the Up event is still queued or the session is already listed.
|
|
let listed = tokio::time::timeout(TIMEOUT, async {
|
|
loop {
|
|
if let Some(s) = server.registry.list().first().cloned() {
|
|
return s;
|
|
}
|
|
let _ = events.recv().await;
|
|
}
|
|
})
|
|
.await?;
|
|
assert_eq!(listed.name.as_deref(), Some("lab"));
|
|
assert_eq!(listed.peer.asn, PEER_ASN);
|
|
assert_eq!(listed.peer.addr, listener.local_addr()?);
|
|
|
|
// Configured view reflects it; the dialer is not in backoff.
|
|
let (cfg, state) = server.registry.configured_peers().into_iter().next().unwrap();
|
|
assert_eq!(cfg.name, "lab");
|
|
assert!(matches!(state, DialState::Connecting | DialState::Idle), "{state:?}");
|
|
|
|
// Local routes flow over the dialled session too.
|
|
server
|
|
.local_rib
|
|
.announce(LocalRoute::new(IpPrefix::try_from("10.100.1.0/24")?, "alice", LocalRouteAttrs::default()))
|
|
.await?;
|
|
let update = tokio::time::timeout(TIMEOUT, peer.recv_update()).await??;
|
|
assert_eq!(update.announced_routes[0].to_string(), "10.100.1.0/24");
|
|
Ok(())
|
|
}
|
|
|
|
#[tokio::test]
|
|
async fn test_server_reconnects_after_peer_closes() -> Result<()> {
|
|
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
|
|
let server = server_dialing(&listener, PEER_ASN).await?;
|
|
|
|
let mut first = accept(&listener).await?;
|
|
first.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90).await?;
|
|
tokio::time::timeout(TIMEOUT, async {
|
|
while server.registry.list().is_empty() {
|
|
tokio::time::sleep(Duration::from_millis(10)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
drop(first);
|
|
|
|
// Session goes away, then the dialer comes back.
|
|
tokio::time::timeout(TIMEOUT, async {
|
|
while !server.registry.list().is_empty() {
|
|
tokio::time::sleep(Duration::from_millis(10)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
let (_, state) = server.registry.configured_peers().into_iter().next().unwrap();
|
|
assert!(matches!(state, DialState::Backoff { .. }), "{state:?}");
|
|
|
|
let mut second = accept(&listener).await?;
|
|
second.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90).await?;
|
|
tokio::time::timeout(TIMEOUT, async {
|
|
while server.registry.list().is_empty() {
|
|
tokio::time::sleep(Duration::from_millis(10)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
Ok(())
|
|
}
|
|
|
|
#[tokio::test]
|
|
async fn test_wrong_asn_is_refused_with_bad_peer_as() -> Result<()> {
|
|
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
|
|
let _server = server_dialing(&listener, PEER_ASN).await?;
|
|
|
|
let mut peer = accept(&listener).await?;
|
|
peer.send_open(65099, Ipv4Addr::new(10, 0, 0, 2), 90).await?;
|
|
let _ = peer.recv_open().await?;
|
|
let notif = tokio::time::timeout(TIMEOUT, async {
|
|
loop {
|
|
match peer.recv().await? {
|
|
Message::Notification(n) => return Ok::<_, eyre::Error>(n),
|
|
Message::KeepAlive => {}
|
|
other => eyre::bail!("unexpected {other:?}"),
|
|
}
|
|
}
|
|
})
|
|
.await??;
|
|
assert!(matches!(notif.error, BgpError::OpenMsg(OpenMsgSubcode::BadPeerAs)), "{notif:?}");
|
|
|
|
// The dialer retries rather than giving up.
|
|
let _again = accept(&listener).await?;
|
|
Ok(())
|
|
}
|
|
|
|
/// An inbound connection from a configured peer's address is also checked
|
|
/// against the configured ASN and gets the configured name.
|
|
#[tokio::test]
|
|
async fn test_inbound_from_configured_address_uses_config() -> Result<()> {
|
|
// Configure a peer at the loopback address on a port nobody listens on,
|
|
// so the dialer never succeeds; then connect inbound from loopback.
|
|
let server = TestServer::start_with(LOCAL_ASN, |c| {
|
|
c.connect_retry = Duration::from_secs(60);
|
|
c.peers = vec![PeerConfig {
|
|
name: "lab".into(),
|
|
endpoint: SocketAddr::new(Ipv4Addr::LOCALHOST.into(), 1),
|
|
remote_asn: PEER_ASN,
|
|
hold_time_secs: 90,
|
|
}];
|
|
})
|
|
.await?;
|
|
|
|
// Wrong ASN inbound → refused.
|
|
let mut bad = TestPeer::connect(server.addr).await?;
|
|
bad.send_open(65099, Ipv4Addr::new(10, 0, 0, 2), 90).await?;
|
|
let _ = bad.recv_open().await?;
|
|
let msg = tokio::time::timeout(TIMEOUT, bad.recv()).await??;
|
|
assert!(matches!(&msg, Message::Notification(n) if matches!(n.error, BgpError::OpenMsg(OpenMsgSubcode::BadPeerAs))), "{msg:?}");
|
|
|
|
// Right ASN inbound → established, named.
|
|
let mut good = TestPeer::connect(server.addr).await?;
|
|
good.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90).await?;
|
|
let listed = tokio::time::timeout(TIMEOUT, async {
|
|
loop {
|
|
if let Some(s) = server.registry.list().first().cloned() {
|
|
return s;
|
|
}
|
|
tokio::time::sleep(Duration::from_millis(10)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
assert_eq!(listed.name.as_deref(), Some("lab"));
|
|
Ok(())
|
|
}
|