What other networks were told of rested on one thing: the Only to Customer mark that routes from providers, peers and route servers get as they come in. A route without it, from a session without a role or by a mistake anywhere along the way, went to every peer, from every router of ours, and nothing of ours stood in the way. export_limits are a second check, independent of the roles, the marks and the export policy. For peers above or beside us (PROVIDER, PEER, ROUTE_SERVER, and any in another AS without a role): - prefixes: only routes for these go out, learned or our own. With our and our customers' space listed, a leak of anyone else's routes goes nowhere above us. - max_prefixes: if more routes were to go out than this, none of them does. The session ends with a Cease / Administrative Shutdown whose Shutdown Communication says why (RFC 9003), and the peer is held down for its import.hold_down_seconds, so that it is told nothing rather than too much. The whole table is counted before any of it is sent. They are set at the top and hold for every such peer that has none of its own; unlike `export`, a peer's own export policy does not drop them. A peer's own export_limits take their place, and an empty one lifts them. Customers, route server clients and our own routers are not limited. A configuration in which learned routes are passed on and a peer in another AS has no role is now refused, as is accept_unconfigured_peers with learned routes: without a role, a peer's routes go to everyone and it is told of everything. This used to be a warning. At startup, a warning for each peer the limits apply to that has none, and for each originated route the limits leave out. A metric, bgp_export_limit_exceeded_total, counts the sessions ended for it. The interop lab has a phase in which a customer leaks: a route outside its space never reaches BIRD, and when more were to go than the limit, BIRD's session ends and its log has our reason. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
353 lines
12 KiB
Rust
353 lines
12 KiB
Rust
//! The active side: the server dials its configured peers and keeps
|
|
//! retrying.
|
|
|
|
use std::net::{Ipv4Addr, SocketAddr};
|
|
use std::time::Duration;
|
|
|
|
use bgp_integration_tests::test_peer::TestPeer;
|
|
use bgp_integration_tests::test_server::TestServer;
|
|
use bgp_packet::errors::{BgpError, OpenMsgSubcode};
|
|
use bgp_packet::message::Message;
|
|
use bgp_primitives::ip_prefix::IpPrefix;
|
|
use bgp_rib::{LocalRoute, LocalRouteAttrs};
|
|
use bgp_server::config::PeerConfig;
|
|
use bgp_server::family::FamilySet;
|
|
use bgp_server::policy::ImportPolicy;
|
|
use bgp_server::session::DialState;
|
|
use eyre::Result;
|
|
use tokio::net::TcpListener;
|
|
|
|
const LOCAL_ASN: u32 = 65000;
|
|
const PEER_ASN: u32 = 65001;
|
|
const TIMEOUT: Duration = Duration::from_secs(5);
|
|
|
|
/// Starts a server configured to dial `listener`'s address as peer "r1".
|
|
async fn server_dialing(listener: &TcpListener, remote_asn: u32) -> Result<TestServer> {
|
|
let endpoint: SocketAddr = listener.local_addr()?;
|
|
TestServer::start_with(LOCAL_ASN, |c| {
|
|
c.connect_retry = Duration::from_millis(200);
|
|
c.peers = vec![PeerConfig {
|
|
graceful_restart: Default::default(),
|
|
groups: Vec::new(),
|
|
export_limits: None,
|
|
reflector_client: false,
|
|
name: "r1".into(),
|
|
endpoint: endpoint.into(),
|
|
remote_asn,
|
|
hold_time_secs: 90,
|
|
local_address: None,
|
|
families: FamilySet::supported(),
|
|
add_path: None,
|
|
import: ImportPolicy::permissive(),
|
|
role: None,
|
|
require_role: false,
|
|
export: Default::default(),
|
|
}];
|
|
})
|
|
.await
|
|
}
|
|
|
|
async fn accept(listener: &TcpListener) -> Result<TestPeer> {
|
|
let (stream, _) = tokio::time::timeout(TIMEOUT, listener.accept()).await??;
|
|
Ok(TestPeer::from_stream(stream))
|
|
}
|
|
|
|
#[tokio::test]
|
|
async fn test_server_dials_configured_peer_and_establishes() -> Result<()> {
|
|
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
|
|
let server = server_dialing(&listener, PEER_ASN).await?;
|
|
|
|
let mut peer = accept(&listener).await?;
|
|
// Both sides send OPEN on connect; the test peer's handshake order works
|
|
// whichever side opened TCP.
|
|
let open = peer
|
|
.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90)
|
|
.await?;
|
|
assert_eq!(open.asn, LOCAL_ASN as u16);
|
|
|
|
let mut events = server.registry.subscribe();
|
|
// Either the Up event is still queued or the session is already listed.
|
|
let listed = tokio::time::timeout(TIMEOUT, async {
|
|
loop {
|
|
if let Some(s) = server.registry.list().first().cloned() {
|
|
return s;
|
|
}
|
|
let _ = events.recv().await;
|
|
}
|
|
})
|
|
.await?;
|
|
assert_eq!(listed.name.as_deref(), Some("r1"));
|
|
assert_eq!(listed.peer.asn, PEER_ASN);
|
|
assert_eq!(listed.peer.addr, listener.local_addr()?);
|
|
|
|
// Configured view reflects it; the dialer is not in backoff.
|
|
let (cfg, state) = server
|
|
.registry
|
|
.configured_peers()
|
|
.into_iter()
|
|
.next()
|
|
.unwrap();
|
|
assert_eq!(cfg.name, "r1");
|
|
assert!(
|
|
matches!(state, DialState::Connecting | DialState::Idle),
|
|
"{state:?}"
|
|
);
|
|
|
|
// Local routes flow over the dialled session too.
|
|
server
|
|
.local_rib
|
|
.announce(LocalRoute::new(
|
|
IpPrefix::try_from("10.100.1.0/24")?,
|
|
LocalRouteAttrs::default(),
|
|
))
|
|
.await?;
|
|
let update = tokio::time::timeout(TIMEOUT, peer.recv_update()).await??;
|
|
assert_eq!(update.announced_routes[0].to_string(), "10.100.1.0/24");
|
|
Ok(())
|
|
}
|
|
|
|
#[tokio::test]
|
|
async fn test_server_reconnects_after_peer_closes() -> Result<()> {
|
|
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
|
|
let server = server_dialing(&listener, PEER_ASN).await?;
|
|
|
|
let mut first = accept(&listener).await?;
|
|
first
|
|
.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90)
|
|
.await?;
|
|
tokio::time::timeout(TIMEOUT, async {
|
|
while server.registry.list().is_empty() {
|
|
tokio::time::sleep(Duration::from_millis(10)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
drop(first);
|
|
|
|
// Session goes away, then the dialer comes back.
|
|
tokio::time::timeout(TIMEOUT, async {
|
|
while !server.registry.list().is_empty() {
|
|
tokio::time::sleep(Duration::from_millis(10)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
let (_, state) = server
|
|
.registry
|
|
.configured_peers()
|
|
.into_iter()
|
|
.next()
|
|
.unwrap();
|
|
assert!(matches!(state, DialState::Backoff { .. }), "{state:?}");
|
|
|
|
let mut second = accept(&listener).await?;
|
|
second
|
|
.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90)
|
|
.await?;
|
|
tokio::time::timeout(TIMEOUT, async {
|
|
while server.registry.list().is_empty() {
|
|
tokio::time::sleep(Duration::from_millis(10)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
Ok(())
|
|
}
|
|
|
|
#[tokio::test]
|
|
async fn test_wrong_asn_is_refused_with_bad_peer_as() -> Result<()> {
|
|
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
|
|
let _server = server_dialing(&listener, PEER_ASN).await?;
|
|
|
|
let mut peer = accept(&listener).await?;
|
|
peer.send_open(65099, Ipv4Addr::new(10, 0, 0, 2), 90)
|
|
.await?;
|
|
let _ = peer.recv_open().await?;
|
|
let notif = tokio::time::timeout(TIMEOUT, async {
|
|
loop {
|
|
match peer.recv().await? {
|
|
Message::Notification(n) => return Ok::<_, eyre::Error>(n),
|
|
Message::KeepAlive => {}
|
|
other => eyre::bail!("unexpected {other:?}"),
|
|
}
|
|
}
|
|
})
|
|
.await??;
|
|
assert!(
|
|
matches!(notif.error, BgpError::OpenMsg(OpenMsgSubcode::BadPeerAs)),
|
|
"{notif:?}"
|
|
);
|
|
|
|
// The dialer retries rather than giving up.
|
|
let _again = accept(&listener).await?;
|
|
Ok(())
|
|
}
|
|
|
|
/// An inbound connection from a configured peer's address is also checked
|
|
/// against the configured ASN and gets the configured name.
|
|
#[tokio::test]
|
|
async fn test_inbound_from_configured_address_uses_config() -> Result<()> {
|
|
// Configure a peer at the loopback address on a port nobody listens on,
|
|
// so the dialer never succeeds; then connect inbound from loopback.
|
|
let server = TestServer::start_with(LOCAL_ASN, |c| {
|
|
c.connect_retry = Duration::from_secs(60);
|
|
c.peers = vec![PeerConfig {
|
|
graceful_restart: Default::default(),
|
|
groups: Vec::new(),
|
|
export_limits: None,
|
|
reflector_client: false,
|
|
name: "r1".into(),
|
|
endpoint: SocketAddr::new(Ipv4Addr::LOCALHOST.into(), 1).into(),
|
|
remote_asn: PEER_ASN,
|
|
hold_time_secs: 90,
|
|
local_address: None,
|
|
families: FamilySet::supported(),
|
|
add_path: None,
|
|
import: ImportPolicy::permissive(),
|
|
role: None,
|
|
require_role: false,
|
|
export: Default::default(),
|
|
}];
|
|
})
|
|
.await?;
|
|
|
|
// Wrong ASN inbound → refused.
|
|
let mut bad = TestPeer::connect(server.addr).await?;
|
|
bad.send_open(65099, Ipv4Addr::new(10, 0, 0, 2), 90).await?;
|
|
let _ = bad.recv_open().await?;
|
|
let msg = tokio::time::timeout(TIMEOUT, bad.recv()).await??;
|
|
assert!(
|
|
matches!(&msg, Message::Notification(n) if matches!(n.error, BgpError::OpenMsg(OpenMsgSubcode::BadPeerAs))),
|
|
"{msg:?}"
|
|
);
|
|
|
|
// Right ASN inbound → established, named.
|
|
let mut good = TestPeer::connect(server.addr).await?;
|
|
good.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90)
|
|
.await?;
|
|
let listed = tokio::time::timeout(TIMEOUT, async {
|
|
loop {
|
|
if let Some(s) = server.registry.list().first().cloned() {
|
|
return s;
|
|
}
|
|
tokio::time::sleep(Duration::from_millis(10)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
assert_eq!(listed.name.as_deref(), Some("r1"));
|
|
Ok(())
|
|
}
|
|
|
|
/// With `local_address` set the connection must come from that address (the
|
|
/// peer may identify us by it), and an address the host does not have is
|
|
/// reported as the reason for backing off rather than silently ignored.
|
|
#[tokio::test]
|
|
async fn test_local_address_is_used_as_the_source() -> Result<()> {
|
|
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
|
|
let endpoint: SocketAddr = listener.local_addr()?;
|
|
let _server = TestServer::start_with(LOCAL_ASN, |c| {
|
|
c.connect_retry = Duration::from_millis(200);
|
|
c.peers = vec![PeerConfig {
|
|
graceful_restart: Default::default(),
|
|
groups: Vec::new(),
|
|
export_limits: None,
|
|
reflector_client: false,
|
|
name: "r1".into(),
|
|
endpoint: endpoint.into(),
|
|
remote_asn: PEER_ASN,
|
|
hold_time_secs: 90,
|
|
local_address: Some(Ipv4Addr::LOCALHOST.into()),
|
|
families: FamilySet::supported(),
|
|
add_path: None,
|
|
import: ImportPolicy::permissive(),
|
|
role: None,
|
|
require_role: false,
|
|
export: Default::default(),
|
|
}];
|
|
})
|
|
.await?;
|
|
let (_stream, from) = tokio::time::timeout(TIMEOUT, listener.accept()).await??;
|
|
assert_eq!(from.ip(), std::net::IpAddr::from(Ipv4Addr::LOCALHOST));
|
|
|
|
// 192.0.2.1 is documentation space; no host has it.
|
|
let server = TestServer::start_with(LOCAL_ASN, |c| {
|
|
c.connect_retry = Duration::from_millis(200);
|
|
c.peers = vec![PeerConfig {
|
|
graceful_restart: Default::default(),
|
|
groups: Vec::new(),
|
|
export_limits: None,
|
|
reflector_client: false,
|
|
name: "r1".into(),
|
|
endpoint: endpoint.into(),
|
|
remote_asn: PEER_ASN,
|
|
hold_time_secs: 90,
|
|
local_address: Some(Ipv4Addr::new(192, 0, 2, 1).into()),
|
|
families: FamilySet::supported(),
|
|
add_path: None,
|
|
import: ImportPolicy::permissive(),
|
|
role: None,
|
|
require_role: false,
|
|
export: Default::default(),
|
|
}];
|
|
})
|
|
.await?;
|
|
let reason = tokio::time::timeout(TIMEOUT, async {
|
|
loop {
|
|
if let Some((_, DialState::Backoff { last_error, .. })) =
|
|
server.registry.configured_peers().into_iter().next()
|
|
{
|
|
return last_error;
|
|
}
|
|
tokio::time::sleep(Duration::from_millis(20)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
assert!(reason.contains("local_address 192.0.2.1"), "{reason}");
|
|
Ok(())
|
|
}
|
|
|
|
/// A peer that takes the connection and then refuses the session, here
|
|
/// because it is not the AS we are configured to expect, will refuse it
|
|
/// again. It is dialled ever more slowly, like a peer that cannot be
|
|
/// reached: connecting used to count as success and reset the wait, so
|
|
/// such a peer was dialled every few seconds for ever.
|
|
#[tokio::test]
|
|
async fn test_a_peer_that_refuses_the_session_is_dialled_ever_more_slowly() -> Result<()> {
|
|
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
|
|
let server = server_dialing(&listener, PEER_ASN).await?;
|
|
|
|
let mut waits = Vec::new();
|
|
for _ in 0..3 {
|
|
let mut peer = accept(&listener).await?;
|
|
peer.send_open(65099, Ipv4Addr::new(10, 0, 0, 2), 90)
|
|
.await?;
|
|
let _ = peer.recv_open().await?;
|
|
let refusal = tokio::time::timeout(TIMEOUT, peer.recv()).await??;
|
|
assert!(
|
|
matches!(&refusal, Message::Notification(n) if n.error == BgpError::OpenMsg(OpenMsgSubcode::BadPeerAs)),
|
|
"{refusal:?}"
|
|
);
|
|
drop(peer);
|
|
|
|
// How long the dialer says it will wait before trying again.
|
|
let wait = tokio::time::timeout(TIMEOUT, async {
|
|
loop {
|
|
if let Some((_, DialState::Backoff { until, last_error })) =
|
|
server.registry.configured_peers().into_iter().next()
|
|
{
|
|
assert!(last_error.contains("AS65099"), "{last_error}");
|
|
return until
|
|
.duration_since(std::time::SystemTime::now())
|
|
.unwrap_or_default();
|
|
}
|
|
tokio::time::sleep(Duration::from_millis(5)).await;
|
|
}
|
|
})
|
|
.await?;
|
|
waits.push(wait);
|
|
}
|
|
// 200 ms, then 400, then 800, less what passed before each was read.
|
|
assert!(
|
|
waits[2] > Duration::from_millis(500),
|
|
"the waits were {waits:?}"
|
|
);
|
|
Ok(())
|
|
}
|