Files
ferrix/crates/integration-tests/tests/dialer.rs
T
Rayhaan JaufeerallyandClaude Fable 5.1 1e2e8f2d86 Pass learned routes on to peers, with marks and control communities
What was to be scripted is configuration, done natively:

- import { add_communities, add_large_communities, remove_communities,
  local_pref }: every route taken from a peer is marked (where it was
  learned, say), with nobody else's word for our marks taken, and given
  its preference, which selection goes by.
- export { add_communities, add_large_communities, remove_communities,
  as_path_prepend, learned_routes }, for a peer or for all that have none
  of their own.
- control_communities: the communities by which routes say which peers
  they are passed on to, as exchanges' route servers have them (0:P, L:P,
  0:L, and the large forms L:0:P, L:1:P, L:0:0), taken off as the route
  goes on.

And what the last of these is for: with export.learned_routes a peer is
told the best route of every prefix the others announced. The rules are
BGP's and cannot be turned off: not back where it came from, not to a
peer whose AS is on the path, not between two internal peers, not past
NO_EXPORT or NO_ADVERTISE; our AS on the path and ourselves as next hop
to another network, LOCAL_PREF to our own; to a route server's client
the path, MED and next hop as they came (RFC 7947). Which routes go where
follows from the roles of RFC 9234: a route that came down or across goes
on down only, so that with roles on every peer this makes us transit for
our customers and nothing else. A peer without a role is told everything,
and the daemon says so at startup.

Each session follows the table's best routes with a reader and keeps the
prefixes it has announced, so that it can withdraw them. Routes that go
out alike go in one UPDATE: changes are gathered for 50 ms first, and a
table that is given out anew is gathered whole (at most four sessions at
a time; it is tens of megabytes). For that to work the table's journal
had to give out together what was written together: every change now
carries a time on a table-wide clock, a reader's pass reads every shard
up to one time, no further than the changes that are complete in every
shard, and a resync takes its places in the journals as of one time.

One peer sending 1.23 M routes over a session, another told of them:
in our table after 0.47 s, all heard after 2.1 s, four routes an UPDATE.
The lab has a phase, transit: FRR as our customer and BIRD as our
provider, routes each way with the right paths and marks, one kept back
by a community, and pings between their networks through us.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
2026-10-02 23:48:08 +02:00

337 lines
12 KiB
Rust

//! The active side: the server dials its configured peers and keeps
//! retrying.
use std::net::{Ipv4Addr, SocketAddr};
use std::time::Duration;
use bgp_integration_tests::test_peer::TestPeer;
use bgp_integration_tests::test_server::TestServer;
use bgp_packet::errors::{BgpError, OpenMsgSubcode};
use bgp_packet::message::Message;
use bgp_primitives::ip_prefix::IpPrefix;
use bgp_rib::{LocalRoute, LocalRouteAttrs};
use bgp_server::config::PeerConfig;
use bgp_server::family::FamilySet;
use bgp_server::policy::ImportPolicy;
use bgp_server::session::DialState;
use eyre::Result;
use tokio::net::TcpListener;
const LOCAL_ASN: u32 = 65000;
const PEER_ASN: u32 = 65001;
const TIMEOUT: Duration = Duration::from_secs(5);
/// Starts a server configured to dial `listener`'s address as peer "r1".
async fn server_dialing(listener: &TcpListener, remote_asn: u32) -> Result<TestServer> {
let endpoint: SocketAddr = listener.local_addr()?;
TestServer::start_with(LOCAL_ASN, |c| {
c.connect_retry = Duration::from_millis(200);
c.peers = vec![PeerConfig {
name: "r1".into(),
endpoint: endpoint.into(),
remote_asn,
hold_time_secs: 90,
local_address: None,
families: FamilySet::supported(),
add_path: None,
import: ImportPolicy::permissive(),
role: None,
require_role: false,
export: Default::default(),
}];
})
.await
}
async fn accept(listener: &TcpListener) -> Result<TestPeer> {
let (stream, _) = tokio::time::timeout(TIMEOUT, listener.accept()).await??;
Ok(TestPeer::from_stream(stream))
}
#[tokio::test]
async fn test_server_dials_configured_peer_and_establishes() -> Result<()> {
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
let server = server_dialing(&listener, PEER_ASN).await?;
let mut peer = accept(&listener).await?;
// Both sides send OPEN on connect; the test peer's handshake order works
// whichever side opened TCP.
let open = peer
.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90)
.await?;
assert_eq!(open.asn, LOCAL_ASN as u16);
let mut events = server.registry.subscribe();
// Either the Up event is still queued or the session is already listed.
let listed = tokio::time::timeout(TIMEOUT, async {
loop {
if let Some(s) = server.registry.list().first().cloned() {
return s;
}
let _ = events.recv().await;
}
})
.await?;
assert_eq!(listed.name.as_deref(), Some("r1"));
assert_eq!(listed.peer.asn, PEER_ASN);
assert_eq!(listed.peer.addr, listener.local_addr()?);
// Configured view reflects it; the dialer is not in backoff.
let (cfg, state) = server
.registry
.configured_peers()
.into_iter()
.next()
.unwrap();
assert_eq!(cfg.name, "r1");
assert!(
matches!(state, DialState::Connecting | DialState::Idle),
"{state:?}"
);
// Local routes flow over the dialled session too.
server
.local_rib
.announce(LocalRoute::new(
IpPrefix::try_from("10.100.1.0/24")?,
LocalRouteAttrs::default(),
))
.await?;
let update = tokio::time::timeout(TIMEOUT, peer.recv_update()).await??;
assert_eq!(update.announced_routes[0].to_string(), "10.100.1.0/24");
Ok(())
}
#[tokio::test]
async fn test_server_reconnects_after_peer_closes() -> Result<()> {
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
let server = server_dialing(&listener, PEER_ASN).await?;
let mut first = accept(&listener).await?;
first
.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90)
.await?;
tokio::time::timeout(TIMEOUT, async {
while server.registry.list().is_empty() {
tokio::time::sleep(Duration::from_millis(10)).await;
}
})
.await?;
drop(first);
// Session goes away, then the dialer comes back.
tokio::time::timeout(TIMEOUT, async {
while !server.registry.list().is_empty() {
tokio::time::sleep(Duration::from_millis(10)).await;
}
})
.await?;
let (_, state) = server
.registry
.configured_peers()
.into_iter()
.next()
.unwrap();
assert!(matches!(state, DialState::Backoff { .. }), "{state:?}");
let mut second = accept(&listener).await?;
second
.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90)
.await?;
tokio::time::timeout(TIMEOUT, async {
while server.registry.list().is_empty() {
tokio::time::sleep(Duration::from_millis(10)).await;
}
})
.await?;
Ok(())
}
#[tokio::test]
async fn test_wrong_asn_is_refused_with_bad_peer_as() -> Result<()> {
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
let _server = server_dialing(&listener, PEER_ASN).await?;
let mut peer = accept(&listener).await?;
peer.send_open(65099, Ipv4Addr::new(10, 0, 0, 2), 90)
.await?;
let _ = peer.recv_open().await?;
let notif = tokio::time::timeout(TIMEOUT, async {
loop {
match peer.recv().await? {
Message::Notification(n) => return Ok::<_, eyre::Error>(n),
Message::KeepAlive => {}
other => eyre::bail!("unexpected {other:?}"),
}
}
})
.await??;
assert!(
matches!(notif.error, BgpError::OpenMsg(OpenMsgSubcode::BadPeerAs)),
"{notif:?}"
);
// The dialer retries rather than giving up.
let _again = accept(&listener).await?;
Ok(())
}
/// An inbound connection from a configured peer's address is also checked
/// against the configured ASN and gets the configured name.
#[tokio::test]
async fn test_inbound_from_configured_address_uses_config() -> Result<()> {
// Configure a peer at the loopback address on a port nobody listens on,
// so the dialer never succeeds; then connect inbound from loopback.
let server = TestServer::start_with(LOCAL_ASN, |c| {
c.connect_retry = Duration::from_secs(60);
c.peers = vec![PeerConfig {
name: "r1".into(),
endpoint: SocketAddr::new(Ipv4Addr::LOCALHOST.into(), 1).into(),
remote_asn: PEER_ASN,
hold_time_secs: 90,
local_address: None,
families: FamilySet::supported(),
add_path: None,
import: ImportPolicy::permissive(),
role: None,
require_role: false,
export: Default::default(),
}];
})
.await?;
// Wrong ASN inbound → refused.
let mut bad = TestPeer::connect(server.addr).await?;
bad.send_open(65099, Ipv4Addr::new(10, 0, 0, 2), 90).await?;
let _ = bad.recv_open().await?;
let msg = tokio::time::timeout(TIMEOUT, bad.recv()).await??;
assert!(
matches!(&msg, Message::Notification(n) if matches!(n.error, BgpError::OpenMsg(OpenMsgSubcode::BadPeerAs))),
"{msg:?}"
);
// Right ASN inbound → established, named.
let mut good = TestPeer::connect(server.addr).await?;
good.handshake(PEER_ASN, Ipv4Addr::new(10, 0, 0, 2), 90)
.await?;
let listed = tokio::time::timeout(TIMEOUT, async {
loop {
if let Some(s) = server.registry.list().first().cloned() {
return s;
}
tokio::time::sleep(Duration::from_millis(10)).await;
}
})
.await?;
assert_eq!(listed.name.as_deref(), Some("r1"));
Ok(())
}
/// With `local_address` set the connection must come from that address (the
/// peer may identify us by it), and an address the host does not have is
/// reported as the reason for backing off rather than silently ignored.
#[tokio::test]
async fn test_local_address_is_used_as_the_source() -> Result<()> {
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
let endpoint: SocketAddr = listener.local_addr()?;
let _server = TestServer::start_with(LOCAL_ASN, |c| {
c.connect_retry = Duration::from_millis(200);
c.peers = vec![PeerConfig {
name: "r1".into(),
endpoint: endpoint.into(),
remote_asn: PEER_ASN,
hold_time_secs: 90,
local_address: Some(Ipv4Addr::LOCALHOST.into()),
families: FamilySet::supported(),
add_path: None,
import: ImportPolicy::permissive(),
role: None,
require_role: false,
export: Default::default(),
}];
})
.await?;
let (_stream, from) = tokio::time::timeout(TIMEOUT, listener.accept()).await??;
assert_eq!(from.ip(), std::net::IpAddr::from(Ipv4Addr::LOCALHOST));
// 192.0.2.1 is documentation space; no host has it.
let server = TestServer::start_with(LOCAL_ASN, |c| {
c.connect_retry = Duration::from_millis(200);
c.peers = vec![PeerConfig {
name: "r1".into(),
endpoint: endpoint.into(),
remote_asn: PEER_ASN,
hold_time_secs: 90,
local_address: Some(Ipv4Addr::new(192, 0, 2, 1).into()),
families: FamilySet::supported(),
add_path: None,
import: ImportPolicy::permissive(),
role: None,
require_role: false,
export: Default::default(),
}];
})
.await?;
let reason = tokio::time::timeout(TIMEOUT, async {
loop {
if let Some((_, DialState::Backoff { last_error, .. })) =
server.registry.configured_peers().into_iter().next()
{
return last_error;
}
tokio::time::sleep(Duration::from_millis(20)).await;
}
})
.await?;
assert!(reason.contains("local_address 192.0.2.1"), "{reason}");
Ok(())
}
/// A peer that takes the connection and then refuses the session, here
/// because it is not the AS we are configured to expect, will refuse it
/// again. It is dialled ever more slowly, like a peer that cannot be
/// reached: connecting used to count as success and reset the wait, so
/// such a peer was dialled every few seconds for ever.
#[tokio::test]
async fn test_a_peer_that_refuses_the_session_is_dialled_ever_more_slowly() -> Result<()> {
let listener = TcpListener::bind((Ipv4Addr::LOCALHOST, 0)).await?;
let server = server_dialing(&listener, PEER_ASN).await?;
let mut waits = Vec::new();
for _ in 0..3 {
let mut peer = accept(&listener).await?;
peer.send_open(65099, Ipv4Addr::new(10, 0, 0, 2), 90)
.await?;
let _ = peer.recv_open().await?;
let refusal = tokio::time::timeout(TIMEOUT, peer.recv()).await??;
assert!(
matches!(&refusal, Message::Notification(n) if n.error == BgpError::OpenMsg(OpenMsgSubcode::BadPeerAs)),
"{refusal:?}"
);
drop(peer);
// How long the dialer says it will wait before trying again.
let wait = tokio::time::timeout(TIMEOUT, async {
loop {
if let Some((_, DialState::Backoff { until, last_error })) =
server.registry.configured_peers().into_iter().next()
{
assert!(last_error.contains("AS65099"), "{last_error}");
return until
.duration_since(std::time::SystemTime::now())
.unwrap_or_default();
}
tokio::time::sleep(Duration::from_millis(5)).await;
}
})
.await?;
waits.push(wait);
}
// 200 ms, then 400, then 800, less what passed before each was read.
assert!(
waits[2] > Duration::from_millis(500),
"the waits were {waits:?}"
);
Ok(())
}