A peer's endpoint may be a link-local IPv6 address with the interface it
is on. Such a peer is the address and the interface together, wherever
peers are told apart: admission, collisions, hold-downs, the refusal log,
the status page. The interface is looked up by name each time it is
needed, so one that appears later or is made anew is found.
Our routes go out with our link-local address in both places of
MP_REACH_NLRI's next hop, as FRR sends its own. A peer's link-local next
hop is taken alone, twice, or after "::" (BIRD), and resolved in the
kernel on the interface of the session rather than by looking fe80::/64
up, which every interface has.
The lab has a new phase, linklocal: sessions with FRR (by interface, with
radvd beside the daemon) and BIRD over a LAN with link-local addresses
only, both families, pings across, the interface down and up.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
New crate bgp-fib. It follows the routing table's best routes and keeps
the kernel's routing table the same, and learns the machine's interfaces
and addresses from the kernel, which is what says whether a next hop can
be reached.
- netlink: the rtnetlink messages used (routes, addresses, links, errors),
as bytes and back. No I/O; property tested and fuzzed.
- interfaces: what is directly reachable, and from which interface.
- plan: what to ask the kernel for, given the best routes and what the
kernel has. No I/O; tested against a model kernel.
- kernel (Linux only): the sockets and the task. Requests go in batches;
routes of ours found at startup are kept if still right and removed if
not; a change of interfaces has every route worked out again; a clean
stop removes our routes.
Only routes marked proto bgp with the configured table and metric are
ever touched. A best route is installed if its next hop is a neighbor;
next hops further away are not resolved through other routes yet, and
such prefixes are counted and shown instead.
Configured with `kernel { table metric }`; off by default. The daemon
needs CAP_NET_ADMIN and stops if the kernel refuses it. On shutdown it
closes sessions and then removes its routes.
/api/kernel and the status page show installed, unresolved and refused
counts, the last error and the interfaces; five bgp_kernel_* metrics.
Testing: scripts/kernel-tests.sh runs, in network namespaces of their
own and with only the capabilities the daemon needs, the installer
against `ip route`, the daemon with a peer, and two daemons that route
for each other with pings across over IPv4 and IPv6.
scripts/linux-vm.sh runs that, or anything else, in a Lima VM from
macOS. CI runs the kernel tests and fuzzes the netlink decoder.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The first part of RPKI origin validation (RFC 6811): the data and how it
gets here. Nothing uses it yet.
VrpTable holds the validated ROA payloads and says whether a route is
valid, invalid or not found. It is a binary trie in one allocation with
a short cut past the first sixteen levels; a lookup against 600,000
entries takes about 40 ns for random addresses. A table is built once
and not changed: when the data changes another takes its place.
rtr is the RPKI-to-Router protocol's PDUs (RFC 8210, and version 0 of
RFC 6810), as bytes and back, without I/O. Lengths are checked from the
header, before the rest of a PDU is waited for.
The client keeps the table in step with a validator's cache. It asks
for everything once and then for changes, when the cache notifies and
at the refresh interval. An answer takes effect only when it is complete
and consistent. Each update says which VRPs came or went, so that only
the routes they cover need looking at again. A cache that fails is
retried and the next one tried; the data is used meanwhile, and dropped
if no cache confirms it within the expire interval. A cache that speaks
only version 0 is spoken to in version 0.
Tests: the cases of RFC 6811, a property test of the trie against the
plain definition, round-trip and hostile-input properties for the
codec, a fuzz target, and the client against a scripted cache.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The work of the speaker-cleanup branch as one commit; the branch keeps
the step-by-step history.
Sessions
- The state machine is a pure function from events to actions, driven by
one task per connection. Idle, Connect and Active belong to a dialer
that keeps configured peers up with backoff.
- Capabilities are negotiated: address families, four-octet AS numbers
with AS_TRANS and AS4_PATH, route refresh, ADD-PATH per family and
direction.
- Collision detection per RFC 4271 section 6.8, by address and
identifier.
- Connections are taken only from configured peers, a few per address.
- A panic in a session is contained and answered with a Cease; a core
task that stops shuts the server down with a Cease to every peer.
- Writes that make no progress are given up (RFC 9687).
Codec
- Malformed UPDATEs are handled as RFC 7606 says: treat-as-withdraw,
attribute discard, or session reset, with the NOTIFICATION to send.
- Address families are open types; any can be named and ignored.
- Prefixes are fixed-size values, normalised, with path identifiers.
- Lengths are filled in after writing; one definition of each type code.
- Property tests and fuzz targets for every decoder.
Routing table
- Adj-RIBs-In and Loc-RIB in one sharded table that sessions write to
directly. Routes are sixteen bytes; attribute sets are interned in
wire form. Best-path selection per RFC 4271 section 9.1.2.2 with
deterministic MED.
- A journal per shard lets followers read changes at their own pace;
one that falls behind is resynchronised.
- On a RIPE RIS dump of 148 peers and 39.3M routes: loaded in 2.0 s on
12 cores, about 52 bytes a route.
Announcing
- Originated routes come from the configuration. Each session has its
own exporter with an Adj-RIB-Out, so a slow peer delays only itself.
- Routes to a peer in our own AS have an empty path and a LOCAL_PREF.
Operations
- HTTP status page, JSON API, event stream and Prometheus metrics.
- Benchmarks on synthetic and real tables.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- Implement passive-side BGP FSM (OpenSent → OpenConfirm → Established)
with hold timer, keepalive timer, and NOTIFICATION on expiry
- Add bgp-server crate: config validation, TCP listener accept loop
(BgpServerBuilder → BgpServer), connection dispatch
- Add bgp-rib crate: Adj-RIB-In actor owning route state with event
broadcast for streaming consumers and snapshot for introspection
- Wire Adj-RIB-In into FSM: announce/withdraw on UPDATE for both legacy
IPv4 NLRI fields and MP_REACH/MP_UNREACH path attributes
- Add bgp-integration-tests crate with 15 end-to-end tests covering
session establishment, timers, UPDATE handling, and RIB introspection
- Fix require_empty! macro bug in open.rs (checked wrong buffer)
- Fix FourByteAsn capability parser returning consumed buffer as remainder
- Fix tracing subscriber not being installed in TracingArgs::install
- Expand docs/RFCs.md with full implementation status across 15 RFCs
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
