What was to be scripted is configuration, done natively:
- import { add_communities, add_large_communities, remove_communities,
local_pref }: every route taken from a peer is marked (where it was
learned, say), with nobody else's word for our marks taken, and given
its preference, which selection goes by.
- export { add_communities, add_large_communities, remove_communities,
as_path_prepend, learned_routes }, for a peer or for all that have none
of their own.
- control_communities: the communities by which routes say which peers
they are passed on to, as exchanges' route servers have them (0:P, L:P,
0:L, and the large forms L:0:P, L:1:P, L:0:0), taken off as the route
goes on.
And what the last of these is for: with export.learned_routes a peer is
told the best route of every prefix the others announced. The rules are
BGP's and cannot be turned off: not back where it came from, not to a
peer whose AS is on the path, not between two internal peers, not past
NO_EXPORT or NO_ADVERTISE; our AS on the path and ourselves as next hop
to another network, LOCAL_PREF to our own; to a route server's client
the path, MED and next hop as they came (RFC 7947). Which routes go where
follows from the roles of RFC 9234: a route that came down or across goes
on down only, so that with roles on every peer this makes us transit for
our customers and nothing else. A peer without a role is told everything,
and the daemon says so at startup.
Each session follows the table's best routes with a reader and keeps the
prefixes it has announced, so that it can withdraw them. Routes that go
out alike go in one UPDATE: changes are gathered for 50 ms first, and a
table that is given out anew is gathered whole (at most four sessions at
a time; it is tens of megabytes). For that to work the table's journal
had to give out together what was written together: every change now
carries a time on a table-wide clock, a reader's pass reads every shard
up to one time, no further than the changes that are complete in every
shard, and a resync takes its places in the journals as of one time.
One peer sending 1.23 M routes over a session, another told of them:
in our table after 0.47 s, all heard after 2.1 s, four routes an UPDATE.
The lab has a phase, transit: FRR as our customer and BIRD as our
provider, routes each way with the right paths and marks, one kept back
by a community, and pings between their networks through us.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Rhai made a decision about a route cost one to three microseconds,
some two hundred times what the same costs in Rust. That was bearable
where a function is asked once for an UPDATE, and is not where every
route is weighed against every peer, as it is when routes are passed
on. What is wanted of a policy (mark routes by where they came from,
mark what is announced, let communities say who is told what) needs no
language; it is to be configuration, done natively.
Kept from that work: route selection goes by a LOCAL_PREF that policy
set on a route from an external peer, and the lab's configuration can
be added to by a phase.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A new crate, bgp-policy, runs functions of a script on routes: on their
way in, after the general checks of a peer's import and before the
checks that can change (RPKI, next hop reachability); and on their way
out to a peer. A function is given the route and the peer, may refuse
the route, and may change its communities, large communities,
LOCAL_PREF and MED, and on the way out prepend our AS:
fn from_peer(route, peer) {
if route.has_community("65535:666") { return false; }
route.add_community(LEARNED_FROM[peer.role]);
route.local_pref = PREFERENCE[peer.role];
true
}
Configuration: policy { path | source, import_function, export_function }
and, for a peer, import { function } and export { function }. The script
is compiled at startup; `bgp --check` reads it and says which function
is whose. A function that fails on a route has refused it. Scripts have
no files, network or clock, and are stopped after 200,000 steps.
Route selection now goes by a LOCAL_PREF on a route from an external
peer: the decoder never lets a peer's own through, so one that is there
was set by policy.
What it costs was measured before it was built on (benches/policy.rs):
a call that tests a few communities and changes two takes 1 to 3
microseconds, some two hundred times what Rust would. So a function is
asked once for the routes of an UPDATE, which share their attributes,
unless it asks for the prefix. One peer sending 1.23 M routes over a
session: 0.37 s without a function, 0.80 s with one that marks and
ranks every route, 3.4 s if it also looks at the prefix.
Export applies to what is announced, which today is what the daemon
originates; learned routes are not passed on yet.
Tested by unit tests of the crate, sessions end to end, a fuzz target on
the example script (testdata/policy.rhai), and a lab phase in which a
script changes which of FRR's and BIRD's route is chosen and what each
of them is told.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
What the code-health review found, and what a fuzz target written for it
found in its first seconds.
- A set of attributes with the same attribute twice is refused by the
routing table. Its readers (the selection key, the path, the next hop)
could each take a different one of the two. The decoder never lets one
through; the new fuzz target `attrs` found that the table would.
- bgp_peer_up{peer}, to alert on a peer going away, and bgp_build_info.
Every metric is there from the first scrape. Alerts for a peer down,
hijack attempts and kernel errors are in the README.
- `bgp --check config` validates a configuration without starting, and
`--version` says which build it is. CI runs the first on the example
configuration, which a test now also parses with its commented fields
put in; the example had to learn about the next hop check.
- Path attributes have a module of their own, packet::attributes,
re-exported from packet::message as before.
- policy::From, which shadowed the trait, is RouteSource. The server's
connection, dialer and fsm modules are private. Logging arguments live
in the binary; the server library no longer depends on clap.
- One is_unicast_link_local (the standard library's) instead of two of
our own; SelectionKey::origin(); one place where an Import is made.
- READMEs say what the daemon does today rather than what it did not do
a year ago. Documentation links are checked in CI. Unused dependencies
and bgp_web::serve are gone; the Docker build is --locked and does not
ship the fuzz corpus.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The work of the speaker-cleanup branch as one commit; the branch keeps
the step-by-step history.
Sessions
- The state machine is a pure function from events to actions, driven by
one task per connection. Idle, Connect and Active belong to a dialer
that keeps configured peers up with backoff.
- Capabilities are negotiated: address families, four-octet AS numbers
with AS_TRANS and AS4_PATH, route refresh, ADD-PATH per family and
direction.
- Collision detection per RFC 4271 section 6.8, by address and
identifier.
- Connections are taken only from configured peers, a few per address.
- A panic in a session is contained and answered with a Cease; a core
task that stops shuts the server down with a Cease to every peer.
- Writes that make no progress are given up (RFC 9687).
Codec
- Malformed UPDATEs are handled as RFC 7606 says: treat-as-withdraw,
attribute discard, or session reset, with the NOTIFICATION to send.
- Address families are open types; any can be named and ignored.
- Prefixes are fixed-size values, normalised, with path identifiers.
- Lengths are filled in after writing; one definition of each type code.
- Property tests and fuzz targets for every decoder.
Routing table
- Adj-RIBs-In and Loc-RIB in one sharded table that sessions write to
directly. Routes are sixteen bytes; attribute sets are interned in
wire form. Best-path selection per RFC 4271 section 9.1.2.2 with
deterministic MED.
- A journal per shard lets followers read changes at their own pace;
one that falls behind is resynchronised.
- On a RIPE RIS dump of 148 peers and 39.3M routes: loaded in 2.0 s on
12 cores, about 52 bytes a route.
Announcing
- Originated routes come from the configuration. Each session has its
own exporter with an Adj-RIB-Out, so a slow peer delays only itself.
- Routes to a peer in our own AS have an empty path and a LOCAL_PREF.
Operations
- HTTP status page, JSON API, event stream and Prometheus metrics.
- Benchmarks on synthetic and real tables.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
